Bee Mine Valentines day card

Awhile I made this bee Valentine's day card. It was extremely popular - I ended up making it in the form of a bee mine (valentine's day card) a mother's day card - have a beeeautiful day and then I made a 2nd Valentine's day card for someone else to give to their partner! It is uncommon for me to sell duplicates of cards as I love coming up with new designs each time but some cards have been extremely popular and people have asked me to make the same design again which I have done!

On the front of the card I used Joset designs (Elizabeth craft designs) bee and beehive and i used karen burniston's outdoor edges for the grass. I cut a label and stamped bee mine in red ink and the bee in black ink from karen burnistons bee sentiments stamp set (Elizabeth craft designs, retired). I used pattern paper for the cloud background and polka dots for the grass from my stash.

On the inside of the card I cut one piece of the same cloud paper for the wall and I used a blue patterned paper for the floor of the card I joined them together and stuck the paper to white thick card stock so that the pop up would work I find paper is not thick enough. So there is an inside piece which is white with the paper stuck to it and the lots of pops die is placed on the fold and cut. I didnt need the two side "pops" so I didnt push them out. This die is discontinued however there are a few companies who have come out with "general pop up" dies with all different sizes I know stampendous, lawn fawn and Elizabeth craft designs have these sets and they are extremely useful because you can pop up just about anythig with them! There is also a second card which is the outside card base, I have found it best to use a thicker card stock on the inside around 270gsm/100 pound and a thinner cardstock on the outside card base closer to 210gsm I often do the inside 6mm/1/4 inch smaller all the way around on the inside but sometimes i make them the same size. When you make the pop up card after you have cut the pop up in this case the lots of pops die on the fold of the card, then you get the outside card base and stick it to the inside card base. It is best to do one side first and then the other and to use a good strong double sided tape. I prefer to use either Elizabeth craft designs tape or sookwang (be creative) tape as it is very strong.

On the top pop up part I put a bee hive and on the lower part I put a rectangle which had sticker saying "happy valentines day". I coloured the sticker red using a sharpie marker. I add a bee on the bee hive and on the floor of the card I put a label for somewhere to write my message and then I added 3 bees around it I stamped 1 love you and xoxo (from general sentiments, Elizabeth craft designs) and cut it out in a rectangle. From the beehive set i cut 5 flowers and coloured them red then I used yellow nuvo drops to make a centre to the flower.

Products used in this card - outer card base is approx 6 x 5 inches (roughly, I cannot recall the exact sizing but that is the beauty of these dies you can choose the card base size to whatever you want it to be, was one of the things that made me like these pop up dies because some brands restrict the size to just one size! The only thing you are restricted by is how big the pop up and what you are popping up are as long as they fit you can do it whatever size you want.

Dies karen burniston (ECD, retired) outdoor edges, lots of pops, Joset designs (Elizabeth craft designs) Bee, Beehive (including the flower from the beehive)

stamps bee sentiments (karen burniston, ECD retired, General sentiments - ECD Elizabeth craft designs)

Paper white cardstock, pattern paper from stash

other - yellow nuvo drops, peel off sticker-happy valentines day

Birthday pop up with faux metal look on front of card using perfect pearls

Hello today I have a relatively simple card with a technique in it from a jennifer mcguire video which I will link at the end of the post.

This is the front of the card

The front of the card I did about 5 x 6 inches and on a white piece of cardstock I used post it tape 1 inch wide to mask off about the width of the tape all the way around the card then in the middle I used grey distress ink and I followed the jennifer mcguire video to create a faux metal look using perfect pearl (pearl colour) powder. To do this is quite simple you put a heavy amount of ink in your choice of colour on using distress ink and a ink blending tool then while its still wet you put some of the perfect pearl powder (this comes in many colours and u can buy kits with 4 colours a clear ink pad and two brushes made by ranger. you dont need to use very much so the small container will last  a long time! So you put a small amount on where the ink is and then you use the brush (i did it over a coffee filter) and you brush it off the excess and put it back into the jar. Then you use a microfibre cloth and buff it and it will become all shiny and pearl like! Its really pretty in real life!

After it is dry (doesnt take very long) I ran it through using a embossing folder from we r memory keepers a 3D one. These are SO amazing in real life! Now some other companies sell these as well like crafters companion.

Then I used die cut happy birthday from karen burnistons happy birthday pop up set with double sided tape on the back so that it automatically becomes a sticker

On the inside I used this same die set  to create a pop up card. I used silver mirror board to cut two wavy pieces for the top and the bottom using one of the dies in I think it is the outdoor edges (ECD Karen Burniston retired) and also the happy birthday and stars both with double sided tape on the back so they are automatically stickers.

Then I cut a white katie label (karen burniston ECD retired) so theres a place to write a message.

There is a video at the end showing how to make this card but this pop up card needs an inside card which you die cut the pop up into and an outside card. In my case it also has an additional piece of white paper which is what is on the front. I have found it best to use thicker cardstock generally around 270gsm/100 pound for the die cut part and thinner cardstock for the outer card. But you can use whatever thickness you want to and make whatever size card you want to also.

Here is a vudeo of the card

Products used in this card

dies Karen Burniston - ECD Happy birthday pop up, katie label, outdoor edges (all retired)

Paper Blue, white, silver (mirror board)

other grey distress ink perfect pearl powder (pearl colour), double sided adhesive tape, we R memory keepers 3D embossing fold

Karen Burniston video how to use happy birthday pop up
This is a link to an explosion birthday card using the happy birthday pop up and though it is a different card base pretty much it shows you how to fold the die cut part to make the pop up as well as creating an explosion card. (please know this die is retired)

 https://www.youtube.com/watch?v=t5P0ebNYWrw&t=14s


Jennifer Mcguire video faux metal look created using perfect pearl powder -This video shows you how to create the silver metal look that i did on the front of this card. Though Jennifer McGuire did not do pop up cards with this technique there is no reason why you cant. You can also do 1, 2 or more colours and also use colours other than the pearl colour to achieve a different look.

https://www.youtube.com/watch?v=rRI9znNZsyg&t=4s